BIO RAD Gel Doc 2000ChemiDocChemiDoc XRS Hardware Instruction Manual page 14

k) Adjust the bracket assembly such that the lens is centered in the opening of the hood as seen
from inside the hood.
l) Secure the bracket to the hood at to the four studs located on top of the hood by using four
black knobs and washers. See picture below:
Black knobs and
washers
Place the Camera + Bracket assembly on top
of the Universal Hood.
Center the lens in the opening of the hood as
viewed from inside of the hood
Secure the bracket to the hood at four studs
using the four knobs and washers.
Page 14 of 42