Cleaning The Spray Arms - Blomberg DW 14110 NBL00 Service Manual

7.11.2.

Cleaning The Spray Arms

Dirt and/or calcium residue may block the
nozzles on the spray arms. For this reason,
regularly check the spray nozzles.
1. Lower spray arm
2. Upper spray arm
1. Remove the lower rack from the machine.
2. Pull off the lower spray arm in an upward direction A.
3. Loosen the fastening screw of the upper spray arm and pull
off the spray arm B by a downward motion.
4. Clean the spray arms under running water.
5. Replace the lower spray arm in a downward direction.
6. Replace the upper spray arm and tighten the fastening screw
by turning it around to the left.
7. Insert the lower rack.
Ensure that the fastening screw is tight on
upper spray arm.
BUILT- UNDER DISHWASHER
48 2011