Filling Rinse Aid Dispenser; Settıng The Water Softener (Dependıng On Model) - Blomberg DW 14110 NBL00 Service Manual

Built - under dishwasher
Hide thumbs Also See for DW 14110 NBL00:
Table of Contents

Advertisement

7.6.1.

Filling Rinse Aid Dispenser

Keep Your Rinse Aids Out Of The Reach
Of Children. Ingestion Or İnhalation Of
Rinse Aid May Cause Serious İnjury. Avoid Contact With
Skin And Eyes, And Keep Children And İnfirm Persons
Away From Rinse Aids.
• Only use rinse aids suited for use in dishwashers. Rinse
aids allow washing water to rinse off more cleanly and
prevent watermarks or streaks on the dishes.
• If you use "2 in 1" or "3 in 1" detergents / tabs, you do not
need additional rinse aid
1. Open the rinse aid dispenser by pressing the lock B.
2. Carefully pour in rinse aid to the MAX mark.
3. Close the lid until it clicks in 3.
4. Carefully wipe off spilled rinse aid. Excessive rinse aid causes
excessive foam formation, which may hinder cleaning.
Set The Dose Of Rınse Aıd
The dose of rinse aid to be used can be set by means of the
dispenser regulator 4 between levels 1 and 6. Change the
setting, only if the following applies after washing:
• Watermarks are visible on the dishes: Set dosage higher.
• Streaks are visible on the dishes: Set dosage lower.
7.7.
Settıng The Water Softener (Dependıng On Model)
BUILT- UNDER DISHWASHER
43
2011

Advertisement

Table of Contents
loading

Table of Contents