13.3.
Display Group
13.4.
On-Off Button Key Holder
The key holder is fixed to the panel back structure by snap fits. The key cap should be mounted
before the holder assembled to the panel back structure
Main card holder is dismantled by bending the snap
fits located on the panel back structure.
The program select, start/stop and the ½ load key
caps then easily be dismantled.
For the models that have a display, display board holder
can be disassembled by releasing the snap fits similiar to
the main board holder. Then display electronics can then
be taken out in the similiar manner
82
BUILT- UNDER DISHWASHER
2011