Readjusting Foot Levels; Adjusting The Movable Toe Kick - Blomberg DW 14110 NBL00 Service Manual

5.17.

Readjusting Foot Levels

5.18.

Adjusting The Movable Toe Kick

Now that the dishwasher is in the cabinet you must
readjust the feet to bring the dishwasher up to the
required height and attach it underneath the
countertop.
1. Readjust the front foot levels with adjusting wrench
to balance the dishwasher and raise it up under the
countertop, make sure the unit is level.
2. Readjust the rear foot levels with a screwdriver to
balance the dishwasher and raise it to the required
height using the brackets supplied.
3. Attach the dishwasher underneath the countertop
with the four screws supplied (Ø 1/8" x 1/8" - Ø 3.5mm
x 14mm). Make sure you do not go through the top of
the countertop or damage granite.
Now that you have successfully installed the dishwasher, you need to
attach the toe kick to the dishwasher. The two piece toe kick can be
adjusted to the height and depth needed for your kitchen. Be sure to use
the slotted toe kick in the front and the other behind it. They slide into
each other.
1. Insert the movable toe kick brackets into the channel (A).
2. Make sure that the plastic tab to the left of the "L" opening on the
dishwasher has not closed the channel you will push the bracket through.
Be sure to notice there is a left and a right bracket.
Adjust the toe kick brackets forward or backwards
so that they will align with the kitchen toe kick (B).
For models, note that you
should keep the total height of
the dishwasher at 321/4" (819mm) max.
29
BUILT- UNDER DISHWASHER
2011