Bottom Layout - Blomberg DW 14110 NBL00 Service Manual

For dismantling the interference filter and the main power cable first of all dismantle the sockets.
Unscrew the screw mounted on the main power cable holder and release the cable.
Then unscrew the two screws, assembling the interference filter and the concrete sheet. Push
the filter as it is seen in the picture in order to release it.

13.17. Bottom Layout

The inner tub differs because of the change made for the new sump, and sump connections
Sump o-ring is placed between the sump and the inner tub in order to prevent leakage
New filter support part is fixed to the sump and inner tub by the
screws numbered as 3, 4 and 5. The sump is fixed to the inner
tub by the help of 5 PT type screws as shown in the picture left.
88
BUILT- UNDER DISHWASHER
2011