Related Manuals for Blomberg DWT37200
Summary of Contents for Blomberg DWT37200
- Page 1 Dishwasher Use and Care Manual FOR MODELS DWT 37200 NBL00 DWT 37220 NBL00 DWT 37210 NBL00 DWT 37240 NBL00...
-
Page 2: Table Of Contents
To prevent accidents, which could cause serious injury or death, as well as machine damage read these instructions before installation and / or use. Contents 1. IMPORTANT SAFETY INSTRUCTIONS 2. INSTALLATION 3. GETTING TO KNOW YOUR DISHWASHER 4. LOADING THE DISHWASHER 4.1 UPPER RACK... -
Page 3: Important Safety Instructions
• Do not tamper with the controls. Notice : Indicates a potentially hazardous situation • Do not abuse, sit on, stand in or on the which, if not avoided, may result in damage door or dish rack of the dishwasher. - Page 4 • Repairs and technical modifications must be carried out exclusively by a qualified technician. • If the dishwasher is not in use for an extended period of time (i.e. vacation home), we recommend you check that the baskets are empty, leave the inside...
-
Page 5: Installation
Consult a qualified electrician if in doubt. WARNING • Do not use any extension cord or When installing the dishwasher, follow portable outlet device to connect the basic precautions, including the following: dishwasher to a power supply. -
Page 6: Getting To Know Your Dishwasher
DWT 37200 NBL00 DWT 37220 NBL00 DWT 37210 NBL00 DWT 37240 NBL00 1. Upper rack 2. Guiding track for the upper rack 3. Upper spray arm 4. Lower rack 5. Salt container (depending on model ) 6. Cutlery basket 7. Lower spray arm 8. -
Page 7: Loading The Dishwasher
• Long and narrow items are placed in the 2. Remove coarse food leftovers from middle of the racks. tableware. • Place all large and very dirty items in the 3. Now you can load the dishwasher. lower rack. • Dishes and cutlery should not be placed Lower rack above each other. -
Page 8: Upper Rack
Make sure that the rack is empty. mechanism which enables you to change Changing the height setting while the the height of the rack even if it is fully rack contains tableware could cause the loaded, and without having to remove it contents to dislodge, causing personal from the dishwasher. -
Page 9: Lower Rack
Simply pull in the first front folding tine, move it to left A and right B to place in 4.2.1 FOUR FOLDING PLATE SUPPORT another positon. When you need, take the TINES (DEPENDING ON MODEL) tines down until the tines fall down. - Page 10 1. Fold the shelf upwards at the angle A. 2. Push the entire inset upwards B. 3. Place the inset in the upright position C. 4. Push the inset down and lock it with the holder D. Simply press the handgrips A and fold them down.
- Page 11 C Adjust spoons around differently. Notice : D Pay attention to any parts that come out of the basket. The movement of the spray arms must not be hindered. Use the basket inset C for your cutlery so that all items in the basket are surrounded by a sufficient water flow.
-
Page 12: Proper And Improper Loading Of Dishware
AHAM DW-1 Standards • Do not overload your dishwasher. Dishes and cutlery should not be placed above each other. Glasses should not touch. • Only with suitable dishes (mentioned in section 5) will you obtain optimal washing results with a sensible use of energy. -
Page 13: What Should Not Be Washed In Your Dishwasher
Notice : CAUTION • Rust-sensitive steel parts like iron and • If in doubt, wash by hand or follow the cast iron that can rust and stain other instructions from the manufacturer of utensils and damage the interior stainless... -
Page 14: How To Use Dishwasher
When the door is closed, the 4. Push in the On/Off button 1 and check that program will continue. the display lights come on. 5. Check the rinse aid level indicator light. 2 FUNCTION BUTTONS If necessary, refill rinse aid. - Page 15 2. After adjusting the delay time, press the WARNING Start/Pause button. Depending on the length of the terminated 3. Close the door. At the end of the delay program detergent and rinse aid may still set, the program starts automatically. be in the dispensers.
-
Page 16: Detergent & Rinse Aid Dispenser
Consult a doctor The salt content immediately if detergent has been can be read on the container for the salt. swallowed or inhaled. When the visual fill indicator is dark, there is enough salt in the container. -
Page 17: Filling Rinse Aid Dispenser
25 ml / 5 tsp mark. When the dishes are less dirty, it is generally sufficient to fill the detergent up to the 15 ml / 3 tsp mark. • The detergent amounts for the individual cleaning programs are shown in the "Quick Reference Guide - Program... - Page 18 • If you use "2 in 1" or "3 in 1" detergents / tabs, you do not need additional rinse aid. 1. Open the rinse aid dispenser by pressing the lock B.
-
Page 19: Setting The Water Softener
8. SETTING THE WATER SOFTENER (DEPENDING ON MODEL) · · ·... -
Page 20: Filling The Dishwasher Salt Dispenser
• The manufacturer is not liable for damages resulting from the use of the wrong type of salt. 3. When operating for the first time: Pour 1 Liter of water into the salt container (Fig. 4. our the salt into the container with the aid of the supplied salt funnel (Fig. -
Page 21: Care And Maintenance
For the best results, apply off the water tap. the stainless steel cleaner to a soft cloth • Do not repair or replace any part and wipe the surface in the direction of the of the dishwasher or attempt grain. any servicing unless specifically recommended by this manual. - Page 22 1. Lower spray arm 2. Upper spray arm 1. Remove the lower rack from the machine. 2. Pull off the lower spray arm in an upward 1. Remove the lower rack from the direction A. machine. 3. Loosen the fastening screw of the upper 2.
-
Page 23: Trouble Shooting
• Have you pressed the On/Off button? What if the dishwasher starts but fails to circulate water within 5 seconds : • Cancel the program by pressing the Start/Pause button for 5 seconds. See section 6. or Quick Reference Guide. -
Page 24: The Dishes Are Not Clean
• Overloaded racks. • Do not overload the racks. • Detergent is moist or clumping in • Store detergents in a dry location. Close the lid of box. the container securely. • Too little detergent. • Increase the amount of the detergent as per the program table. - Page 25 • Bleaches in cleaners lose their efficiency when box. stored under unfavorable conditions. Store detergents in a dry location. Close the lid of the container securely. • Using cutlery with a low surface • Cleaning of these items is made difficult by their quality.
- Page 26 • When water hardness is low (below 7 American degree of hardness or 106 parts per million), do not use salt even if your dishwasher has a water softener. • Use a lower phosphate content detergent. Rust stains, destruction of the...
- Page 27 • Detergent is moist or clumping in • Store detergents in a dry location. Close the lid of box. the container carefully. • Spray arm nozzles are clogged.
- Page 28 Scratched dishes Possible causes How to fix these problems • Dish items/parts made from • Dishes and cutlery of this type are not suited for aluminium. the dishwasher. • The lid of the salt container is • Check whether the lid of the salt container is not closed securely.
-
Page 29: Technical Features
1200 W (watts) Heater power 1000 W (watts) Notice : Because we continually strive to improve our products, we may change our specifications and design without prior notice. This device corresponds to the following directives: UL 749 Household Dishwasher directive. -
Page 30: Warranty Statement For The Blomberg Dishwashers
The warranty also does 2 year * ++ limited warranty from date of not cover defects or damage caused first installation by an act of god (such as storms, (Parts only) Blomberg will repair or replace floods, fires, mudslides, etc.), damage... -
Page 31: How To Get Service
14. HOW TO GET SERVICE Please contact the Distributor for your State or Province as listed on the Distributor Contact List, or call our Toll Free Number at 1 800 459 9848 for direction to an Authorized Blomberg Service Agent. - Page 32 17 1618 01 00 00-B3-USA...