5.10.
Installing The Side Trim Strips
Adjust the front foot level with the adjusting wrench to
balance and raise the dishwasher to the enclosure height.
Adjust the rear foot level with a screwdriver to balance and
raise the dishwasher to the enclosure height.
• Make sure the dishwasher is plumb and notice
dishwasher can be placed with a small clearance
under the counter top.
• Turning the screwdriver in the direction of the black
arrows will bring the dishwasher back feet up.
• Turning the screwdriver in the direction of the white
arrows will take the dishwasher rear feet
Remove the adhesive tape (Figure A).
Place the trim strips on the front edge of the side walls (Figure B).
Make sure you use the correct trim strip since there is a left and
right side strip. The flexible material should be facing forward
(Figure B).
BUILT- UNDER DISHWASHER
22
down.
2011