Water Supply Connection; Braided Hose/Copper Tubing; Electrical Connection; Grounding Instructions - Blomberg DW 14110 NBL00 Service Manual

Built - under dishwasher
Hide thumbs Also See for DW 14110 NBL00:
Table of Contents

Advertisement

5.15.2.

Water Supply Connection

5.15.3.

Braided Hose/Copper Tubing

After connections are made turn on the water supply to check for leaks.
• Hot water supply line: Use minimum 3/8" O.D. copper tubing or metal
braided dishwasher supply line.
• Temperatures required for soldering and sweating will damage the dishwasher's water
inlet valve so if any such operation is needed, keep the heat source min. 77/8" (200mm)
away from the dishwasher's water inlet valve.
• There should not be any sharp bends in the water line that may restrict the water flow.
• Teflon tape or pipe tread compound must be used for sealing the connection. Before
connecting the copper water supply line to the dishwasher, flush it with hot water to clear
any foreign material.
After connections are made turn on the water supply to check for leaks.
5.16.

Electrical Connection

• Make sure the voltage and frequency listed on the data plate correspond
with the household electrical supply. This data must correspond to
prevent injury and machine damage. Consult a qualified electrician if in doubt.
• Only connect the dishwasher to the mains when all installation and plumbing work is
complete.
• Do not use any extension cord or portable outlet device to connect the dishwasher to a
power supply.
5.16.1.

Grounding Instructions

This appliance must be grounded. In the event of a malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a path of least resistance for electric current. This
appliance must be installed and grounded in accordance with all local codes and ordinances.
Improper connection of the equipment-grounding conductor can result in
a risk of electric shock. Check with a qualified electrician or service
representative if you are in doubt whether the appliance is properly grounded.
Water supply may be connected to the dishwasher in one
of two ways:
• With metal braided hose.
• With copper tubing.
27
BUILT- UNDER DISHWASHER
2011

Advertisement

Table of Contents
loading

Table of Contents