Steps; Operator Input Steps In The Measured Variable Display; Table 8- 4 Assignments Of The Function Keys In Edit Mode Of The Device Settings - Siemens SENTRON PAC3100 Manual

Function keys
Table 8- 4
Reject the changes and return to display
mode
Increment the numerical value by "1"
or
show the next selectable setting
Decrement the numerical value by "1"
Go to the next digit to the right in the multi-
digit numerical value
Save the changes and return to display
mode
See also
Display of the device settings (Page 75)
Operator input steps in device settings display (Page 80)
8.2

Steps

8.2.1

Operator input steps in the measured variable display

Selecting the measured variable
When displaying the instantaneous value, it is possible to switch to other measured
variables.
F2
F3
The order of the measured variables corresponds to the order in the main menu.
If the maximum/minimum value or average value is displayed, F2
available. In this case, switch first to the display of the instantaneous value.
Note: It is also possible to select the measured variable in the main menu.
Display minimum, maximum, and instantaneous value
F1 switches the display on.
F1
F1
F1
SENTRON PAC3100
Manual, 07/2009, A5E02385159B-01
Assignments of the function keys in edit mode of the device settings
Key function
switches to the previous measured variable.
switches to the next measured variable.
: Display of the maximum value
: Display of the minimum value
: Display of the instantaneous value
F1 F2
Operator control
8.2 Steps
F3 F4
and F3 are not
77