Siemens SENTRON PAC3100 Manual page 71

Display title
The display title in the header of the display contains the following information:
● Designation of the measured variable
● Designation of the measured value property
● Display number of the measured variable
Designation of the measured variable
The first position in the display title contains the designation of the measured variable
displayed. Since the length of the line is restricted, the unit of the measured variable is also
used as the name.
For an overview, see the Appendix.
Designation of the measured value property
The second position in the display title contains the currently displayed measured value
property.
For an overview, see the Appendix.
Function keys
The function keys have multiple assignments in the measured value display. F2
F3
Display the instantaneous value
Display the maximum value
Display the minimum value
Reset the maximum or minimum value to the
instantaneous value
Scroll up in the selection list
Scroll down in the selection list
Go to the menu selection
See also
Operator input steps in the measured variable display (Page 77)
Measured variables (Page 119)
SENTRON PAC3100
Manual, 07/2009, A5E02385159B-01
are only available when the instantaneous value is displayed.
Key function F1 F2
Operator control
8.1 Device interface
and
F3 F4
71