Table of Contents
Advertisement
4)
Power up the scan tool , and wait for the Main Screen to
appear.(Figure 3.1)
3.6 System Setup
The System Setup functions allow you to adjust default settings and
view information about the scan tool.
1)
Language: Selects the desired language.
2)
Unit of measure: Sets the unit of measure to English or Metric.
3)
Beep Set: Turns on/off beep.
4)
Key Test: Checks if the keyboard is working properly.
5)
LCD Test: Checks if the LCD display is working properly.
6)
About: Provides information of the scan tool.
Settings of the unit will remain until change to the existing
settings is made.
To enter the Setup menu
From the Main Screen: Use LEFT/RIGHT scroll button to select
Setup, and press the OK button. Following the instructions to do
adjustments and settings could make your diagnosis more
conveniently and easily. (Figure 3.2)
Figure 3.1
13
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Autolink AL619 and is the answer not in the manual?
Questions and answers