Read Codes - Autel Autolink AL619 Manual

the
manufacturer's customer service department for assistance.
7） View a summary of system status (MIL status, DTC counts,
Monitor status) on screen. (Figure 5.1 ) Press ESC button for
Diagnostic Menu (Figure 5.3) to come up.

If more than one module is detected, you will be prompted to
select a module before testing. (Figure 5.2 )
 Use the UP/DOWN scroll button to select a module and press
the OK button.

5.1 Read Codes

 Reading Codes can be done with the key on engine off (KOEO)
or with the key on engine running (KOER).
 Stored Codes are also known as "hard codes", which are fault
codes, or trouble codes that have been stored in the vehicle
computer memory because the faults have reoccurred for
vehicle. Contact
MIL Status
Codes Found
Monitors N/A
Monitors OK
Monitors INC
Save
Module $10
Module $A4
your local
System Status
OFF
0
8
2
0
Figure 5.1
Control Module
Figure 5.2
23
distributor
OK
or the