Driving Data (Multifunction Display) - Skoda KODIAQ Owner's Manual

Operating the MAXI DOT display
Hold - display main menu

Press - return to a previous level in the menu
Turn - move in the selected menu
B
Press - confirm selected menu item
Note
Depending on equipment not all functions may be available. The system indi-
cates this by means of a text message on the Infotainment screen.

Driving data (Multifunction display)


Introduction
The driving data display is only possible with the ignition switched on. After
the ignition is switched on, the function that was last selected before switch-
ing off the ignition is displayed.
If vehicles with MAXI DOTdisplay do not show the journey data after switch-
ing on the ignition, select the menu item Journey data in the main menu and con-
firm » page 58.
The units can be adjusted in Infotainment in the menu
The journey data can be set/reset in Infotainment in the menu
Instrument cluster.
Note
The setting of the information display is stored in the active user account per-
sonalisation » page 59.
Information Overview
Overview of driving data (depending on the vehicle equipment).
Range - drive distance in km which can be covered with the existing tank ca-
pacity and with the same driving style. If you drive more efficiently this value
can increase.
®
AdBlue range - drive distance in km which can be covered with the existing
®
AdBlue tank capacity and with the same driving style. If you drive more effi-
ciently this value can increase.
56
Operation
Average fuel consumption - is calculated continuously since the last time the
memory was deleted. After erasing the memory, no data will appear for the
first 100 m driven.
Current fuel consumption - when the vehicle is stationary or slowly moving,
the fuel consumption is displayed in l/h (--,- km/l appears on models for some
countries).
Oil temperature - if the temperature is lower than 50 °C or if there is a fault in
the system for checking the oil temperature, the  symbols are displayed.
Warning when the preset speed is exceeded - allows the setting of a speed
limit where, if exceeded, an acoustic warning signal and a warning message ap-
pears on the display of the instrument cluster.
Traffic sign recognition - traffic signs display
nition.
Current speed - digital speedometer.
Average speed - is calculated continuously since the last time the memory
was deleted. After erasing the memory, no data will appear for the first 300 m
driven.
Driving route - distance driven since the last time the memory was deleted.
/  →  → Units.
Driving time - driving time since the last time the memory was deleted.

/  →  →
Comfort consumers - information about the total consumption of the com-

fort consumers in l/h and a list of three consumers (e.g. air conditioning etc.),
which have the largest share of fuel consumption.
Infotainment display
›
In Infotainment in the menu
» page 261, Traffic sign recog-
Fig. 49
Journey data
/  Tap on function surface  → Driving data.

