Table of Contents
Advertisement
If route guidance is taking place at this moment using Infotainment, then this
is not terminated by starting the route guidance in the MirrorLink
Read in the QR
code» Fig.
219orenter the following address in the web brows-
er to open the website with information on the supported MirrorLink
http://go.skoda.eu/connectivity
main menu
Main menu - function surfaces and information
Return to SmartLink main menu
Displays a list of running applications with the ability to terminate them
Display the application last shown (as long as the application is running)/
show the display content of the connected external device
Settings of the SmartLink
» page 143
List of applications
A
Other pages with applications (by performing a finger movement side-
B
ways across the screen, other pages with applications are displayed)
Application is not certified for use while driving
Operation
Start the application
®
▶
In the Mirrorlink
connection main menu, select the desired application in the
field
» Fig. 220
on page 181.
A
The application starts and the following function surfaces are displayed.
®
- application.
Fig. 220
MirrorLink®: Main menu
» page 178
menu or
» page 148
Show function surfaces at the top/bottom (applies to Infotainment
Amundsen, Bolero)
Move the functional surfaces in the desired corner of the screen
(applies to the infotainment Swing)
®
system.
Return to MirrorLink
Show/hide function surfaces (applies to Infotainment Amundsen, Bolero)
Press the control knob .
▶
Display of the running application
▶
In the main menu of the MirrorLink
» Fig. 220
on page 181 to display the last displayed application.
If you want to display a different application, then the function surface of the
desired application must be tapped in the main menu of the MirrorLink
nection
» Fig. 220
A
Ending the current application
Tap the function surface → .
▶
Press the function surface of the desired application with the symbol .
▶
Tap the function surface Close all to close all running applications that support
this feature.
function problems
If problems occur with the MirrorLink
messages may occur on the screen.
Fault: Transfer - Disconnect and reconnect the external device
■
MirrorLink® audio is not available. - Disconnect and reconnect the external device
■
■
MirrorLink® availability on this mobile device is restricted. - The connected device can-
not be used while driving
The mobile device is locked. Please unlock the mobile device to use MirrorLink® - unlock
■
"the external device"
Unable to start app or app not working. - Disconnect and reconnect the external
■
device
®
main menu
®
- connection, press the function surface
on page 181.
®
connection, then one of the following
®
con-
181
SmartLink
Advertisement
Table of Contents
