Skoda KODIAQ Owner's Manual page 158

The USB input audio source can be connected directly or via a connecting ca-
ble.
›
To connect, insert the USB audio source into the appropriate input.
›
To disconnect the USB, tap on the Media main menu function surface  →
Tap on Remove safely.
›
Disconnect the audio source from the corresponding USB input.
Load USB audio source
With the ignition, the charging process starts automatically after the USB au-
dio source is connected (applies to audio sources where charging via the USB
connector is possible).
The charging efficiency can differ compared to charging from the usual mains
power supply.
Depending on the type of the connected external device and the frequency of
use, the charging current may not be sufficient to charge the battery of the
connected device.
Some connected audio sources may not be recognised and cannot be charged.
CAUTION
USB extension cords, or reducers may impair the function of the connected
audio source.
Note
We recommend that you use extension cords from ŠKODA Original Accesso-
ries.
AUX input
Installation location of the AUX input
›
To connect, insert the plug of the AUX audio source into the appropriate
connector.
›
To disconnect, pull the plug out of the AUX audio source.
CAUTION
The AUX input must only be used for audio devices!
■
If an external audio source is connected to the AUX input, which is equipped
■
with an adapter for external power supply, the sound may be impaired.
156
Infotainment
» page 98.
Note
The 3.5 mm stereo jack plug is used for the AUX input.
■
We recommend that you use extension cords from ŠKODA Original Acces-
■
sories.
®
Bluetooth player
Infotainment allows audio files of a connected Bluetooth
the A2DP and AVRCP audio profile.
With Infotainment, multiple devices can be paired using Bluetooth
one of them can be used as a Bluetooth
Connect / disconnect
›
®
To connect the Bluetooth player with Infotainment- follow the same in-
structions as for pairing Infotainment with a
›
®
To disconnect the Bluetooth player, end the connection in the list of paired
external devices » page 168.
®
Replace Bluetooth player (applies to Infotainment Amundsen, Bolero)
If you would like to replace a Bluetooth
ment as a phone at the same time, , then a relevant information message ap-
pears on the Infotainment screen.
›
End the connection to the currently connected Bluetooth
the pairing procedure » page 168, Managing paired external devices.
CAUTION
If an external device is connected to Infotainment using Apple CarPlay or
Android Auto, then it cannot be connected using Bluetooth
Jukebox
Only valid for Infotainment Columbus.
In the Jukebox (in the Infotainment internal memory), supported audio / video
files can be imported from connected external devices.
Import files
›
Tap the function surface in the Media main menu  → Manage jukebox → Import.
›
Select the desired source.
›
Select the desired folders or files.
›
Tap the function surface  .
®
player to play using
®
, but only
®
player.
telephone» page 168.
®
-Player which is connected to Infotain-
®
player and repeat
®
.
