Table of Contents
Advertisement
Import list
After the primary telephone and/or the SIM card (applies to Infotainment Co-
lumbus) connects to the infotainment system for the first time, the import of
the telephone contacts to the infotainment memory starts. The import can
take several minutes.
In the infotainment phonebook, there are 4000 (applies to Infotainment Co-
lumbus) and 2000 (applies to Infotainment Amundsen, Bolero, Swing) free
storage locations for imported telephone contacts. Each contact can contain
up to 5 telephone numbers.
The number of imported contacts can be determined in the menu item →
User profile → Import contacts: or. Import contacts being determined.
If an error occurs during the import, an appropriate message appears on the
screen.
Refresh list
When the telephone reconnects with Infotainment, the list is automatically up-
dated.
The update can be carried out manually as follows.
In the Telephone main menu, tap on the function surface → User profile →
▶
Import contacts: or tap on Import contacts
Management of preferred contacts (favourites)
Function surface for emergency call
If the vehicle is not equipped with the buttons for the Care Connect serv-
ice» page
16, the position of the first function surface in the first group of fa-
vourites will show the function surface for an emergency call . In some
countries, this function may not be available.
172
Infotainment
Fig. 211
Favourite contacts
The function surface can be assigned a different number for the preferred
contact.
To restore the emergency number, it is necessary to remove the telephone
from the list of paired external devices
nect again.
Assigning favourites
›
In the main menu Telephone, tap on the desired function surface
›
Select the desired contact (if required, one of the contact numbers).
Connecting to a favourite
The function surfaces of preferred contacts allow the contact telephone num-
bers to be dialled immediately.
The favourites are available in two storage groups.
›
To the change Storage Group tap on the functional surface
›
To choose tap on the assigned function area
Change allocated favourites
›
In the main Telephone menu, press and hold the desired function surface
» Fig.
211.
›
Select the desired contact (if required, one of the contact numbers).
Delete a favourite
›
In the Telephone main menu, tap on function surface → User profile → Manage
favourites.
›
Press the desired function surface of the preferred contact and confirm the
deletion.
You can delete all contacts by tapping on the function surface Delete all / All
and confirm the deletion process.
» page 168
and then to pair and con-
» Fig.
A
» Fig.
211.
B
» Fig.
211.
A
211.
A
Advertisement
Table of Contents
