Table of Contents
Advertisement
›
Tap the function surface Network settings.
›
Select the data provider.
If your data provider is not available in the list, ask your provider whether one
of the displayed providers can be used.
›
To check the network settings and adapt them in accordance with your data
provider's instructions if necessary, tap on the Network settings function sur-
face.
The usage settings for data connection via SIM card can be configured in the
→ → Network → Data connection:.
Manual configuration of the data connection network (APN access point)
If the data connection is not established automatically or if you wish to config-
ure the network (APN access point) manually, proceed as follows.
›
Tap the
sensor field and then the function surface → Network → Network
settings.
›
Carry out manual configuration in accordance with your data provider's in-
structions.
›
To save the configured values, tap the Store function surface.
Change PIN code
›
In the Telephone main menu, tap on function surface → PIN setup → Change
PIN.
›
Enter the new PIN code and confirm.
see SIM card
›
Press on the inserted SIM card.
The SIM card "jumps" into the eject position.
›
Remove the SIM card from the slot.
CAUTION
When inserting an incorrectly sized SIM card, there is a risk of damage to In-
■
fotainment.
Avoid using a an adapter for the SIM card as the SIM card may fall out while
■
driving due to vehicle vibrations - There is the risk of damage to the external
module.
If you let the SIM card protrude out from the slot, then it may fall out of the
■
slot while driving due to vehicle vibrations.
170
Infotainment
Note
If a SIM card is inserted in the external module and the option to use the SIM
card telephone services is selected, the currently connected telephones will be
disconnected. You can then only connect the additional telephone to the info-
tainment system.
rSAP
Applies to Infotainment Columbus with the SIM card slot in the external mod-
ule.
®
The Bluetooth
profile RSAP (remote transmission of data SIM) also allows, in
®
contrast to Bluetooth
profile HFP, the use of data services from the connec-
ted phone (if this profile is supported by the phone and data services are ena-
bled in this phone)
» page
177.
®
The use of Bluetooth
profile RSAP requires the telephone function of the ex-
ternal module to be switched on.
Switching on and off
›
In the Telephone main menu, tap on the function surface → "Business" tele-
phone "interface".
The pairing and connection process takes place in the same way to the Blue-
®
tooth
profile HFP
» page
167.
If the rSAP profile is supported by the telephone to be connected, then the in-
fotainment system tries to connect using this profile with priority. Depending
on the phone, the connection can be blocked or released using an rSAP profile
in the phone.
Note
If a SIM card is inserted in the external module, the phone cannot be connec-
■
ted to Infotainment by the rSAP profile.
If an external device is connected via Apple CarPlay or Android Auto, then
■
the data connection using rSAP cannot be carried out.
Telephone functions
Enter telephone number and select
Enter a telephone number and dial
›
In the Telephone main menu, tap on the function surface .
Advertisement
Table of Contents
