Cargo Elements
Fig. 155 Removal: Removing: Variant 1/Variant 2/Variant 3/fastening ex-
ample of the load
Read and observe
and
The cargo elements are designed for mounting and securing loads with a maxi-
mum gross weight of 8 kg.
›
Before use, remove the Cargo elements in the direction of the arrows
» Fig. 155
- , , .
›
To access the Cargo elements in version 3, first fold down the side parts of
the floor covering in the direction of arrows
›
Use the cargo elements to secure the load as close as possible to the rear
seats
» Fig. 155
.
›
After use, stow the Cargoelements in their original position.
114
Operation
on page 109 first.
» Fig. 155
- .
A
Removable light
Fig. 157 Removing light/inserting light
Read and observe
and
The light is located on the left side of the luggage compartment and is used to
light the luggage compartment or as a portable light.
The lamp is fitted with magnets. As a result, this can, for example, be fitted to
the vehicle body.
Description of the light
» Fig. 156
Button to turn on / off the light
A
Part that lights up when the lamp is in the mount
B
Part that lights up when the lamp is not in the mount
C
If the light is in the mount, this will illuminate when the boot lid is opened.
›
To remove, hold the light in the area
» Fig.
157.
1
Fig. 156
Removable light
on page 109 first.
and swivel in the direction of arrow
D