Rear View Mirror - Skoda KODIAQ Owner's Manual

Hide thumbs Also See for KODIAQ:
Table of Contents

Advertisement

This function can be activated/deactivated in Infotainment in the menu
→  → Mirrors and wipers.
Note
The rear window is wiped automatically if the windscreen wipers are on
when reverse gear is selected.
The setting (activation/deactivation) of the automatic rear window wiping in
the rain is stored (depending on the Infotainment type) in the active user ac-
count personalisation
» page
59.
Headlight cleaning system
Read and observe
and
Headlights are cleaned under the following conditions.
The ignition is switched on.
The low beam is switched on.
The outside temperature is about -12° C to +39° C.
To clean the headlights, the headlamp is also sprayed after every ten squirts.
The adjustment of the spray interval can be be adjusted by a specialist garage
(maximum after every twentieth spraying of the windscreen).
To ensure the correct functioning of the system, even in winter, this needs to
be regularly cleared of snow and ice (e.g. using the de-icing spray).

Rear view mirror

Introduction
WARNING
Exterior mirrors increase the field of view, however, make objects appear
smaller and further away. Therefore, use the rear-view mirror to determine
the distances to the following vehicles.
84
Operation
on page 82 first.
/ 
WARNING

The mirrors with automatic dimming contain electrolyte fluid which may
leak if the mirror glass is broken - this can irritate skin, eyes and the respira-
tory system.
If your eyes or skin come into contact with the electrolyte fluid, immedi-
ately wash the affected area for a few minutes with plenty of water. Seek
medical assistance if required.
Interior mirror dimming
Fig. 85 Interior rear-view mirror manual dimming/auto-darkening
Read and observe
Mirrors with manual dimming
Basic position of the mirror (not dimmed)
1
Mirror blackout
2
Mirror with automatic dimming
The mirror dimming
» Fig. 85
When the interior lights are switched on or the reverse gear is engaged, the
mirror moves back into the basic position (not dimmed).
on page 84 first.
» Fig. 85
is automatically controlled after the engine start.

Advertisement

Table of Contents
loading

Table of Contents