Skoda KODIAQ Owner's Manual page 251

Hide thumbs Also See for KODIAQ:
Table of Contents

Advertisement

Operation overview
Fig. 308 Operating lever
Read and observe
on page 247 first.
Overview of ACC functions operated with the lever
Activate ACC (regulation deactivated)
1

Start control (resume) / increase speed by 1 km/h at a time
2

(sprung position)
Interrupt control (sprung position)
3

Deactivate ACC
4

Increase speed by 10 km/h at a time
5
 
Decrease speed by 10 km/h at a time
6
 
  Set proximity level
A
Start control / reduce speed in increments of 1 km/h
B

If the lever is set from the position  directly into the sprung position 
the current speed is stored and the control process is started.
Start control
Basic requirements for start of control
Start control
Press the button 
or: Set the lever into the sprung position 
The ACC takes the current driving speed and performs the control, the warn-
ing light
» Fig. 308
If the control is started by moving the lever to the position  and if the
speed is already stored, the ACC adopts this speed and carries out the control.
Note
If control is started at a speed of less than 30 km/h on vehicles with an auto-
matic transmission, the speed of 30 km/h is stored. The speed increases auto-
matically to 30 km/h or is regulated with respect to the speed of the vehicle
ahead.
Stop/resume control
Stop control
Set the lever into the sprung position 
or: Apply the brake.
Control stops, the speed remains stored.
Resume control
Start control
Note
Control is also stopped when the clutch pedal is held down for longer than 30
s or the TCS is deactivated.
Read and observe
on page 247 first.
The ACC is activated.
On vehicles with manual transmission, the second gear or a higher gear is
selected and the current speed is greater than 25 km/h.
On vehicles with automatic transmission, the selector lever is in the D/S
position or in the Tiptronic position.
» Fig. 308
on page 249 .
illuminates in the instrument cluster.
Read and observe
on page 247 first.
» page
249, Start control.
» Fig. 308
on page 249 .
» Fig. 308
on page 249 .
249
Assist systems

Advertisement

Table of Contents
loading

Table of Contents