Table of Contents
Advertisement
The Telephone main menu appears when a telephone is connected to Infotain-
ment.
›
To display, press the
button.
If another, menu id displayed which was open last, to display the Telephone
main menu, press the button again
Main menu - Information and function surfaces
Name of the connected phone (by tapping the list of paired phones dis-
A
played)
Functional surfaces of preferred contacts
B
Choice of storage group for the preferred contacts
C
Name of the telephone service provider (with active roaming, the sym-
D
bol appears before the name )
Enter the telephone number
Display the telephone contact list
Display the call list (missed calls, in addition to the function surface, the
number of calls when missed is displayed)
Starting voice control of the connected phone (e.g. Siri, Google Voice)
Settings for the Telephone menu
Symbols in the status bar
Signal strength of the telephone service network
Charge status of the telephone battery
Missed call
Current call
Pairing and connecting
Introduction to the subject
The range of the connection to Infotainment is limited to the passenger com-
partment.
To connect a telephone with Infotainment, the two devices must be paired via
®
Bluetooth
.
The pairing process is dependent on the number of phones that are already
connected or on the use of the SIM card inserted in the external module (ap-
plies to Infotainment Columbus)
.
» Fig. 207
» page 171
» page 148
» page
169.
Depending on the Infotainment model, up to 20 external devices can be paired
with the device. After reaching the maximum number, the pairing of the next
external device will replace that of the device that has not been used for the
longest period of time.
A connection with a telephone that is already paired does not require pairing. It
is enough to find the telephone that has been paired in the list of paired
phones and make the connection.
WARNING
Pair and connect a telephone to Infotainment only when the vehicle is at a
standstill - there is risk of an accident!
conditions for pairing
The telephone can be paired with Infotainment under the following conditions.
The ignition is switched on.
®
The Bluetooth
function of the infotainment and the telephone is switched
on.
The visibility of the infotainment and the telephone is switched on.
The telephone is within range of the Bluetooth
The telephone is compatible with the infotainment.
There is no external device connected to Infotainment using Apple
CarPlay.
The pairing can be initiated from Infotainment or from the telephone.
During the pairing and connection process, information messages are dis-
played on the Infotainment screen and the telephone screen. These messages
must be observed and if necessary confirmed (e.g. enabling the contact im-
®
port, connecting the Bluetooth
player among others).
Fig. 208
QR code with reference to the
ŠKODA websites
®
signal of Infotainment.
167
Telephone
Advertisement
Table of Contents
