Table of Contents
Advertisement
Power on / off
Fig. 171 Button for switching on / off (Climatronic / manual air condi-
tioning)
Read and observe
and
Functional requirements of the auxiliary heating.
The charge state of the vehicle battery is sufficient.
The fuel supply is adequate (the warning light
instrument cluster).
Manual on / off
▶
Using the button on the operating part of the air
▶
Using the (switch on) / (switch off) button on the remote control opera-
tion.
Automatic on / off
▶
Via an automatically programmed and activated pre-set time in Infotainment.
▶
According to the environmental conditions.
Switching off the auxiliary heating takes place automatically when there is a
lack of fuel (warning light
in the instrument cluster lights up).
After switching off the system, the coolant pump and the auxiliary heating will
continue running a little while longer in order to burn the remaining fuel in the
heating.
Setting automatic on / off
Climatronic: On the Climatronic, press the button → tap the function
surface on the Infotainment screen. There will be a display of the last set oper-
ating mode with the option to change this.
124
Operation
on page 123 first.
is not illuminated in the
conditioning» Fig.
Individually controlled air conditioning: In the Infotainment system, in menu
/ tap die function surface.
Then follow the instructions on the Infotainment screen.
When automatic switching on is activated, the warning light in the symbol
button lights up for about 10 seconds after the ignition is turned off
Operation in Infotainment
Fig. 172 Auxiliary heater: Main menu/set preset time
Read and observe
Call up the main menu
171.
›
On the Climatronic, press the button → Tap the function surface in the
Infotainment screen.
Or vehicles with manual air conditioning:
›
In the Infotainment system, in menu
Function surfaces and screen display
Departure time - Day and time when the vehicle is to be ready for use
A
Setting the operating mode (heating / ventilation)
B
List of pre-selected times, activation / deactivation of the preset time
C
Set the preset times 1-3 and the duration (10-60 minutes)
D
When heating the windows are shown in red / with continuous aeration,
E
the windows are shown in blue
Currently displayed preset time
F
Activation of the currently displayed preset time
G
Setting the departure time: Day, hour, minute
H
and
on page 123 first.
/ tap die function surface.
» Fig. 172
» Fig.
171.
Advertisement
Table of Contents
