Installation Of The Communication Option Led Display Cover - Mitsubishi Electric FR-A7NC Instruction Manual

2.2

Installation of the communication option LED display cover

Mount the cover for displaying the operation status indication LED for the communication option on the
inverter front cover.
1)
Cut off hooks on the rear of the inverter front
cover with nipper, etc. and open a window for
fitting the LED display cover.
Take care not to hurt your hand and such with portions left by cutting hooks of the rear of the
front cover.
Cut off with a nipper, etc.
Cut off with a nipper, etc.
CAUTION
2)
Fit the communication option LED display
cover to the front of the inverter front cover
and push it into until fixed with hooks.
Fit it so that the position of
lenses is in the upper-right
of the LED display cover.
When attached
INSTALLATION
9
2