Mitsubishi Electric FR-A7NC Instruction Manual page 76

(2) Reply code definition
The reply to the instruction execution is set to RWr2, 10, 12, 14, 16, 18.
When executing the frequency setting (RYD, RYE) or instruction code execution (RYF), check the
reply code (RWr2) in the remote register after execution.
Data
H0000 Normal
Reply
H0001 Write mode error
code
H0002 Parameter selection error Unregistered code number was set.
H0003 Setting range error
H00 Normal
Reply
H01 Write mode error
code 1
*
Frequency command
H03 (torque command) setting
range error
H00 Normal
Reply
H01 Write mode error
code 2
H02 Parameter selection error Unregistered code number was set.
H03 Setting range error
Item
No error (normal completion of instruction code
execution)
Parameter write was attempted during operation
other than a stop in the network operation
mode.
Set data is outside the permissible data range.
No error (normal completion of instruction code
execution)
Parameter write was attempted during operation
other than a stop in the network operation
mode.
Frequency (torque command) outside the range
is set
No error (normal completion of instruction code
execution)
Parameter write was attempted during operation
other than a stop in the network operation
mode.
Set data is outside the permissible data range.
DETAILS OF INPUT AND OUTPUT SIGNALS
Alarm Definition Remarks
⋅ Reply code to Rwr2
when Pr. 544 = 0
⋅ Reply code to
RWwr10, 12, 14,
16, and 18 when Pr.
544 = 18
Reply code to RWwr2
when Pr. 544 ≠ 0, (100)
69
7