Table of Contents
Advertisement
5.2 Output from the inverter to the network
Main items which can be output from the inverter to the master and their descriptions are explained below.
Item
Inverter status monitor
Output frequency monitor
Output current monitor
Output voltage monitor
Special monitor
Faults history
Data at alarm occurrence
Operation Mode
Parameter read
Read of set frequency (torque command) The current set frequency (torque command) can be read.
REMARKS
Refer to the inverter manual for functions controllable from the network in each operation mode.
Description
The output terminal status of the inverter can be
monitored.
The output frequency can be monitored.
The output current can be monitored.
The output voltage can be monitored.
The monitor data selected can be checked.
Fault records can be checked.
The inverter status at alarm occurrence can be checked.
The current operation mode can be checked.
Parameter settings can be read.
FUNCTION OVERVIEW
Refer to Page
58
67, 71
71
71
71
68, 72
68
71
73
72
5
43
Advertisement
Table of Contents
