Table of Contents
Advertisement
2
INSTALLATION
2.1
Pre-Installation Instructions
Make sure that the input power of the inverter is off.
With input power on, do not install or remove the plug-in option. Otherwise, the inverter and
plug-in option may be damaged.
2.2
Installation of the Communication Option LED Display Cover
Mount the cover for displaying the operation status indication LED for the communication option on the
inverter front cover.
1)
Cut off hooks on the rear of the inverter front
cover with nipper, etc. and open a window for
fitting the LED display cover.
Take care not to hurt your hand and such with portions left by cutting hooks of the rear of the
front cover.
CAUTION
Cut off with a nipper, etc.
Cut off with a nipper, etc.
CAUTION
2)
Fit the communication option LED display
cover to the front of the inverter front cover
and push it into until fixed with hooks.
Fit it so that the position of
lenses is in the upper-right
of the LED display cover.
Fitting drawing
2
7
Advertisement
Table of Contents
