Suzuki GN125F Service Manual page 59

Remove the generator rotor and key with the special tool.
11F14-001: Rotor holder
11F14-003: M16 screw
11F14 005: Generator rotor remover M30 -
Do not damage the key slot and crankshaft when
removing the key.
Remove the starter clutch gear.
Remove the roller 1
starting clutch.
Hold the generator rotor with the special tool, remove the
starting clutch bolt.
11F14-001: Rotor holder
Do not remove the starting clutch unless necessary.
Remove the generator stator
Remove the trigger coil
, push piece 2 , and spring
.
4
.
5
ENGINE
3 from the
3-28