Spacer - Suzuki GN125F Service Manual

REMOVAL AND DISASSEMBLY
Remove the front wheel (refer to page 5-2).
Remove the two bolts and dismount the front caliper
Remove the four bolts and take off the front fender
Remove the four handlebar holder clamp bolts, take off the
handle bar 3 , then remove the two front absorber cap bolts.
Remove the decoration plate.
Loosen the lower bracket clamp bolts, put down the left and
right front absorbers.
Remove the cap bolt and draw out the spacer and absorber
spring.
CHASSIS
.
1
.
2
5-7
2
3