Warning - Suzuki GN125F Service Manual

WARNING

WARNING
The brake system of this motorcycle is filled with a Suzuki brake fluid. Do not use or mix
different types of fuid such as silicone-based and petroleum-based fluid for refilling the
system, otherwise serious damage will be caused.
Do not use any brake fluid taken from old or used or unsealed containers. Never re-use the
brake fluid left over from the last servicing and stored for long periods.
When storing the brake fluid, seal the container completely and keep away from children.
When replenishing brake fluid, take care not to get dust into fluid.
When washing brake components, use new brake fluid. Never use cleaning solvent.
A contaminated brake disc or brake pad reduces braking performance. Discard contaminated
pads and clean the disc with high quality brake cleaner or neutral detergent.
CAUTION CAUTION
Immediately and completely wipe off any brake fluid contacting any part of the motorcycle. The
brake fluid reacts chemically with paint, plastics and rubber materials, etc., and will damage
them severely.
BRAKE PAD REPLACEMENT
Remove the brake caliper mounting bolts .
Remove the brake pads mounting bolt and brake pads
b
replace the rake pads.
Replace brake pads as a set; otherwise braking per-
formance will be adversely affected.
Reinstall the new brake pads and the caliper.
Tighten the caliper mounting bolts to the specified torque.
Brake caliper mounting bolts: 18~28 N•m
CAUTION CAUTION
While installing the brake caliper, push the pistons all
the way into the brake caliper.
CHASSIS
,
5-19