Suzuki GN125F Service Manual page 35

Remove the lead wire
Take off the spark plug cap
Remove the muffler mounting bolt
Remove the muffler mounting bolts
muffler.
Remove the engine front mounting bolt
hanging plate bolt 19
plate.
Remove the engine upper mounting bolt
21
mounting bolt .
Remove the rear swing arm shaft nut
swing arm shaft, take out the engine from the right side.
The engine must be taken out from the right side
Be careful not to draw out the swing arm pivot
shaft completely from the left side swing arm pivot
,
hole Insert the shaft or rod into the right side pivot
hole from the right side of the frame to keep the
alignment of the frame holes and swing arm pivot
holes.
14 of starter motor wire.
15 .
.
16
,
17
18
, take off the engine lower hanging
20
, draw out the rear
22
ENGINE
then take off the
and engine lower
and rear lower
.
3-4