Caution - Suzuki GN125F Service Manual

OIL SEAL
Install the oil seal to the outer tube by using the special
tool as shown.
09940-50112: Absorber oil seal installer

CAUTION

Apply Super Grease lightly on the oil seal lip.
ABSORBER OIL
Pour the specified absorber oil into the inner tube.
Front absorber oil capacity (each leg): 168±3 ml
Absorber oil type: # 32
Hold the front absorber vertical and adjust the absorber oil
level with the special tool.
CAUTION
When adjusting the absorber oil level, compress the
inner tube fully without the absorber spring.
Absorber oil level: 166 mm
09943-74111: Front absorber oil level gauge
FRONT ABSORBER SPRING
When installing the front fork spring, the close pitch end
should position upside.
FRONT ABSORBER INNER SCREW PLUG
Install the front absorber inner screw plug and tighten it.
CHASSIS
5-10
Upside
Downside