Web Login Example; Http Login Example - H3C S5500-HI Series Fundamentals Configuration Manual

Web login example

HTTP login example

Network requirements
As shown in
Figure 27 Network diagram
Configuration procedure
Configure the device
1.
# Create VLAN 999, and add interface GigabitEthernet 1/0/1 on the device that connects to the PC to
VLAN 999.
<Sysname> system-view
[Sysname] vlan 999
[Sysname-vlan999] port GigabitEthernet 1/0/1
[Sysname-vlan999] quit
# Configure the IP address of VLAN 999 as 192.168.0.58 and the subnet mask as 255.255.255.0.
[Sysname] interface vlan-interface 999
[Sysname-VLAN-interface999] ip address 192.168.0.58 255.255.255.0
[Sysname-VLAN-interface999] quit
# Create a local user named admin, and set the password to admin for the user. Specify the Telnet
service type for the local user, and set the command level to 3 for this user.
[Sysname] local-user admin
[Sysname-luser-admin] service-type web
[Sysname-luser-admin] authorization-attribute level 3
[Sysname-luser-admin] password simple admin
Verify the configuration
2.
# On the PC, run the web browser. Enter the IP address of the device in the address bar. The web login
page appears, as shown in
Figure 27, configure the device to allow the PC to log in over the IP network.
Figure 28.
68