Configuring Common Settings For Vty User Interfaces (Optional) - H3C S5500-HI Series Fundamentals Configuration Manual

Figure 15 Configuration page

Configuring common settings for VTY user interfaces (optional)

Follow these steps to configure Common settings for VTY user interfaces:
To do...
Enter system view
Enable display of copyright
information
Enter one or multiple VTY user
interface views
User
interface
configuration
Enable the terminal
service
Enable the current
user interface(s) to
support either Telnet,
SSH, or both of them
Define a shortcut key
for terminating tasks
Configure the type of
terminal display
Set the maximum
number of lines on the
next screen
Use the command...
system-view
copyright-info enable
user-interface vty
first-number
[ last-number ]
shell
protocol inbound { all |
ssh | telnet }
escape-key { default |
character }
terminal type { ansi |
vt100 }
screen-length
screen-length
43
Remarks
—
Optional
Enabled by default.
—
Optional
Enabled by default.
Optional
By default, both protocols are supported.
The configuration takes effect next time you
log in.
Optional
By default, you can press Ctrl+C to
terminate a task.
Optional
By default, the terminal display type is
ANSI.
Optional
By default, the next screen displays 24
lines.
A value of 0 disables the function.