Configuring Https Login - H3C S5500-HI Series Fundamentals Configuration Manual

To do...
Configure the HTTP service port
number
Associate the HTTP service with an
ACL
Create a local user and enter local
user view
Configure a password for the local
user
Specify the command level of the
local user
Specify the Telnet service type for
the local user
Exit to system view
Create a VLAN interface and enter
its view
Assign an IP address and subnet
mask to the VLAN interface

Configuring HTTPS login

Follow these steps to configure HTTPS login:
To do...
Enter system view
Use the command...
ip http port port-number
ip http acl acl-number
local-user user-name
password { cipher | simple }
password
authorization-attribute level level
service-type web
quit
interface vlan-interface
vlan-interface-id
ip address ip-address { mask |
mask-length }
Use the command...
system-view
65
Remarks
Optional
80 by default.
If you execute the command
multiple times, the last one takes
effect.
Optional
By default, the HTTP service is not
associated with any ACL.
Associating the HTTP service with
an ACL enables the device to allow
only clients permitted by the ACL to
access the device.
Required
By default, no local user is
configured.
Required
By default, no password is
configured for the local user.
Required
No command level is configured
for the local user.
Required
By default, no service type is
configured for the local user.
—
Required
If the VLAN interface already
exists, the command enters its
view.
Required
By default, no IP address is
assigned to the VLAN interface.
Remarks
—