Configuring Common Settings For Modem Login (Optional) - H3C S5500-HI Series Fundamentals Configuration Manual

Figure 26 Configuration page

Configuring common settings for modem login (optional)

Follow these steps to configure common settings for modem login:
To do...
Enter system view
Enable display of copyright
information
Enter one or more AUX user
interface views
Configure
console port
properties
Use the command...
system-view
copyright-info enable
user-interface aux first-number
[ last-number ]
Configure the
speed speed-value
baud rate
Configure the
parity { even | none | odd }
parity check mode
Configure the stop
stopbits { 1 | 1.5 | 2 }
bits
60
Remarks
—
Optional
Enabled by default.
—
Optional
By default ,the baud rate is 9600
bps.
Transmission rate is the number of
bits that the device transmits to the
terminal per second.
Optional
By default, the parity check mode of
the AUX port is set to none, which
means no check bit.
Optional
By default, the stop bits of the
console port is 1.
Stop bits are the last bits transmitted
in data transmission to
unequivocally indicate the end of a
character. The more the bits are, the
slower the transmission is.