Configuring Common Settings For Console Login (Optional) - H3C S5500-HI Series Fundamentals Configuration Manual

Figure 11 Configuration page

Configuring common settings for console login (optional)

Follow these steps to configure common settings for console login:
To do...
Enter system view
Enable display of copyright
information
Enter AUX user interface view
Configure
console port
properties
Use the command...
system-view
copyright-info enable
user-interface aux
first-number
[ last-number ]
Configure the
speed speed-value
baud rate
Configure the parity { even | none |
parity check mode odd }
Configure the stop
stopbits { 1 | 1.5 | 2 }
bits
Remarks
—
Optional
Enabled by default.
—
Optional
By default, the transmission rate is 9600 bps.
Transmission rate is the number of bits that the
device transmits to the terminal per second.
Optional
none by default.
Optional
By default, the stop bits of the console port is 1.
Stop bits are the last bits transmitted in data
transmission to unequivocally indicate the end of
a character. The more the bits are, the slower the
transmission is.
34