Additional Functions; Extra Drying; Delay Start - Miele PG 8080U Operating Instructions Manual

Extra drying

In order to achieve better drying results
and to reduce the amount of steam
which escapes when the door is
opened, the fan runs for longer at the
end of the program when Extra drying is
selected. This function is not available
for all programs (see "Program
overview").
With Extra drying selected, the program
duration will increase by approx. 20-30
minutes, depending on the program.
 Turn the commercial dishwasher on
using the  button.
The "Start/Stop" indicator light flashes.
 Select a program.
 Press the  button.
The "" indicator light will come on if
this function is available for the selected
program. Otherwise
shown in the display.
 Start the program by pressing Start/
Stop button.
Option not possible

Additional functions

Delay start

The start time of a program can be
delayed, e.g. to benefit from economy
rates of electricity. A delay start time of
between 30 minutes and 24 hours can
be selected. The delay start time is set
in 30 minute steps.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry with a cloth if
necessary.
If the compartment is wet, detergent
can clump up and stick to the
dispenser, which may prevent the
detergent from being fully dispensed.
 Turn the commercial dishwasher on
with the  button.
The "Start/Stop" indicator light flashes.
 Select the program you require (see
is
"Operation, Selecting a program").
 Press the  button.
The last delay start time used will
appear in the display. The "Delay start"
indicator light comes on.
 Set the desired delay start time using
the  button.
If the delay start button is kept pressed
in, the time will increase automatically
up to 24:00 h
again, press the  button twice.
. To start at 30 minutes
41