Before Using The Commercial Dishwasher For The First Time You Will Need; Filling The Salt Reservoir - Miele PG 8080U Operating Instructions Manual

Commissioning
Before using the commercial
dishwasher for the first time
you will need:
– approx. 1 kg dishwasher salt for
reactivation,
– approx. 110 ml rinse aid,
– Dishwasher detergent, see
"Operation"
Every commercial dishwasher is
tested at the factory.There may be
residual water in the machine from this
test. This is not an indication that it
has been used previously.

Filling the salt reservoir

In order to achieve good cleaning
results, the commercial dishwasher
needs to operate with soft (low in
calcium deposits) water. Hard water
results in a build-up of calcium deposits
on dishware and in the commercial
dishwasher. Water with a hardness level
higher than 4 gr/gal (4 °d / 0.7 mmol/l)
needs to be softened. This takes place
automatically in the integrated water
softener. The water softener in the
commercial dishwasher is suitable for a
water hardness level of up to 37 gr/gal
(36 °d / 6.5 mmol/l).
See "Settings menu, Water hardness"
for setting the water softener.
20
If the water in your area is very soft
and constantly lower than 4 gr/gal
(0.7 mmol/l / 4 °d - German scale),
you do not need to add
dishwasher .salt
The water softener must, however,
still be programmed to correspond to
the water hardness level in your area.

Do not fill the salt reservoir with
dishwasher detergent (including
liquid detergent).
Dishwasher detergent will damage
the water softener.

Only use special coarse grained
dishwasher salt for reactivation, or
pure evaporated salt.
Miele Professional offer appropriate
products.
Other types of salt may contain
insoluble additives which can impair
the functioning of the water softener.