Time Display; Standby - Miele PG 8080U Operating Instructions Manual

Operation

Time display

The duration of the program selected
appears in hours and minutes in the
display before the program begins.
During the program, the time left until
the end of the program is displayed.
Each program stage is indicated by a
symbol:
 Pre-wash
 Main wash
 Interim rinse
 Final rinse
 Drying
 Finished
The displayed program duration may
vary with the same program. It is
influenced by, among other things, the
water temperature at each intake, the
reactivation process of the water
softener and the amount of dishes.
When a program is selected for the first
time, the display shows an average
program duration for warm water intake.
The program duration changes if the
electrical connection is changed.
38

Standby

To save energy, the commercial
dishwasher will switch to Standby
mode a few minutes after the last time a
button has been pressed or a few
minutes after the end of the program.
The display and the indicator lights will
go out and only the Start/Stop indicator
light will flash slowly.
 Press any button to turn the display
back on.
If the commercial dishwasher is not
switched off at the end of the program,
it will switch off completely after a few
minutes in Standby mode (see "Settings
menu, Optimize standby").
The commercial dishwasher will not
switch into Standby mode whilst a
program is running, if salt or rinse aid
needs to be replenished or there is a
fault.
You can switch off the reminders to
replenish salt and rinse aid so that
the commercial dishwasher will go
into Standby despite a lack of salt or
rinse aid (see "Settings menu, Refill
display").
You cannot switch off fault
messages.