Checking The Filters In The Wash Cabinet; Cleaning The Filters - Miele PG 8080U Operating Instructions Manual

Checking the filters in the
wash cabinet
The filter combination in the base of the
wash cabinet retains coarse soiling
from the suds solution, preventing it
from accessing the circulation system
and re-entering the cabinet through the
spray arms.

This commercial dishwasher
must not be used without all the
filters in place!
Collection of coarse soil may cause the
filters to clog. The level of soiling and
time it takes before the filters need
cleaning will vary depending on use.
The message
Check filters
the display after every 50 program
cycles (factory default setting).
You can turn off the filter check or set
the interval for this message to appear
between 30 to 60 program cycles (see
"Settings menu, Check filter").
 Check the filter combination.
 Clean it if necessary.
 Confirm the message with the middle
button.
The last selected program is displayed
briefly in the display and the respective
indicator light comes on. After a short
while, the estimated program run time is
displayed.
will appear in
Cleaning and care

Cleaning the filters

 Turn the commercial dishwasher off.
 Turn the handle counter-clockwise to
release the filter system .
 Lift the filter system out of the
commercial dishwasher , remove
any coarse particles and rinse the
filter well under running water. Use a
brush if necessary.

Ensure that coarse soil does not
get into the circulation system.
It could cause a blockage.
45