Standard Settings - Miele PG 8080U Operating Instructions Manual

Standard settings

 Switch the commercial dishwasher
on with the  button.
If the commercial dishwasher is being
turned on for the first time, the welcome
screen will appear.
Language
The display will change automatically to
the screen for setting the language.
See the Display functions section for
details.
 Select the desired language and
press the centre button to confirm.
A check  will appear next to the
language that has been set.
Water hardness
The display changes to the water
hardness setting.
– The commercial dishwasher must be
programmed to exactly match the
hardness of your water.
– Miele Service is able to measure the
exact water hardness on site.
Alternatively contact your local city
water supplier for the water hardness
level in your area.
– Where the water hardness fluctuates
e.g. between 18 - 26 gr/gal (17 -
25 °d - German scale), always
program the commercial dishwasher
to the higher value (26 gr/gal or 25 °d
in this example).
Commissioning
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
Enter the water hardness below:
gr/gal / °d
The water hardness factory setting is
programmed at 15 °dH (=16 gr/gal or
2.7 mmol/l).
 Select the water hardness level for
your water supply and confirm with
the center button.
See "Settings menu, Water hardness"
for more information.
The following two messages 
and 
rinse aid Refill salt
appear in the display.
Press any button to confirm these
messages. The display changes to the
"Main menu".
Refill
may then
19