Table of Contents
Advertisement
Time display
The estimated duration of the program
selected appears in hours and minutes
in the display before the program be-
gins. During the program, the time left
until the end of the program is dis-
played.
Each program phase is indicated by a
symbol:
Pre-rinse/Soak
Main wash
Interim rinse
Final rinse
Drying
Finish
The displayed program duration may
vary with the same program. It is influ-
enced by things such as the water tem-
perature at each intake, the reactivation
process of the water softener, and the
amount of dishware.
The times shown in the program guide
refer to standard test loads and temper-
atures.
Each time a program is run, the elec-
tronic module calculates the program
duration required depending on the
temperature of the water taken into the
dishwasher and the amount of dish-
ware.
Energy management
To save energy, the dishwasher will
switch off automatically 10 minutes af-
ter the last time a button has been
pressed or after the end of a program.
Press the button to switch the
dishwasher back on.
The dishwasher will not turn off auto-
matically if the time of day display has
been activated (see "Settings menu -
Time of day").
The dishwasher will not switch off
while a program or the FlexiTimer is
running or if there is a fault.
Operation
41
Advertisement
Table of Contents
