Water Inlet -Time-Contro Ie D/Level- Control Led; Drying-Vented Or Non-Vented.28; Cycle-Time Display - Miele G 595 SC Operating Instructions Manual

Additional Functions
1+ Water Inlet - lengthens fill time
to compensate for low water
pressure.
• Turn off dishwasher by pushing
"On-Off" button to "Off" position.
• Press "Short", "Non-heated
drying" button, and push "On-Off"
button to "On", all at the same time.
The letter "P,: will display,
• Press "Intensive +" button and unit
will display "10" or "11".
"10" (high water pressure)
"11* {low water pressure} - in¬
creases water level,
• Press "Mon-heated drying" button
and "10" changes to "11" or the
other way around
• Press "1-9 hrs" button. Unit dis¬
plays "SP".
• Press "1-9 hrs" button again. The
selection is now stored in me¬
mory,
2. Drying " vented or non-ventecL
• Turn off dishwasher by pushing
"On-Off" button to "Off" position.
• Press "Short", "Non-heated
drying" button and push "On-Off"
button to "On" position, all at the
same lime. The "P" will display.
• Press "Intensive" button. The unit
displays "20" or "21".
"20" - regular, vented dry.
"21" convection, non-vented dry.
NOTE; Generally #20 dries more tho¬
roughly. Please use liquid "Blue Jet
Dry", page 11.
• Press "Non-heated drying" button
and "20,: becomes "21" or the
other way around.
• Press "1-9 hrs" button. Unit dis¬
plays "SP".
• Press "1-9 hrs" button again. The
selection is now stored in me¬
mory,
3. Cycle-time Display
The dishwasher has been pro¬
grammed at the factory for hot water
connection. If a cold connection is in
effect, the cycle time will be much
longer.
• To change the cycle from hot to
cold, do the following:
• Turn off dishwasher by pushing
"Or-Off" button to "Off" position.
• Press "Short", "Non-heated
drying" button and push "On-Off"
button to "On" position, all at the
same time. The T" will display.
• Press "Normal". The timer displays
"40" (hot water connection).
• Press "Non-heated drying button
and the timer will display "41"
(cold water connection).
• Press "1-9 hrs" button. The timer
displays "SP",
• Press "1-9 hrs" button once more.
The selection is now stored in
memory.