Menu 1: LAP time
3
LAP function information is available when the
function is active. After the LAP function activation
from the SETTING MENU, when going back to the
Standard screen the LAP function is automatically
displayed as first page of MENU 1 and the messages
"TIME" and "LAP" are displayed respectively in MENU
1 and on the display. it is then possible to toggle
through the other Menu 1 functions. When the LAP
function is activated, the timer is displayed indicating
"0'00''00".
when the FLASH button (3) is pressed for the first
time, or upon an equivalent command (optional GPS)
3
the instrument panel displays the lap timer with
resolution of a tenth of a second ("0' 00''0"). Every
time the FLASH button (3) is pressed again, or upon
an equivalent command (optional GPS), the display
temporarily shows the number and time of the just-
ended lap, then it will show the timer and number of
the new current lap.
Fig 41
85