Using Your Linkstation; Linkstation Configuration Utility - Buffalo LinkStation User Manual

Chapter 1

Using your LinkStation

LinkStation Configuration Utility

To configure your LinkStation, use the web-based configuration utility from a browser on a
computer connected to the same network.
1
Launch NAS Navigator2. For Windows, click on the [BUFFALO NAS Navigator2] icon on your
desktop. For Mac OS X, double-click on the [NAS Navigator2] icon in the Dock.
2
3
LinkStation User Manual
Right-click on the LinkStation icon (on Mac OS X,
click the icon while holding down the control key)
and select [Open Web Setting] from the menu.
Notes: If multiple LinkStations and TeraStations
are connected to the network, multiple
icons will be displayed. Click on the correct
LinkStation.
Record the LinkStation's IP address from the
bottom right of the NAS Navigator2 window.
Enter your username and password, and click [Login].
Initially, use the default username and password:
Username: admin
Password: password
After you log in, change the password for security.
4