Ricoh J-P3 Service Manual page 93

20 February 2004 TROUBLESHOOTING GUIDE
4. Check the tendency of color shift in the grid pattern printed in step 3. Sometimes, a magnification scope must be used to
measure the amount of color shift between colors.
5. Take the required action explained in each section depending on the type of color shift.
6. Do the 'Auto Adjust' in the User Program mode after the adjustment is done in step 5, and check the result.
7. Repeat steps 3 to 6 until the color shift is acceptable.
For more on troubleshooting, see Model J-P2 Service Manual.
4-19