Ricoh J-P3 Service Manual page 153

20 February 2004
8061
T: FIN Jobs
8064 P: FIN Jobs
8067 O: FIN Jobs
001 Sort
002 Stack
003 Staple
004 Booklet
005 Z-Fold
006 Punch
007 Other
8071 T: Jobs/PGS
8074 P: Jobs/PGS
8077 O: Jobs/PGS
001 1 Page
002 2 Pages
003 3 Pages
004 4 Pages
005 5 Pages
006 6~10 Pages
007 11~20 Pages
• The jobs interrupted by paper jams or some other errors are also counted.
• If a job is suspended and restarted later, the job is seen as one job.
• If the finisher runs out of staples during stapling, the job is counted at the time
the error occurs.
• The first test print and subsequent test prints to adjust settings are added to the
number of pages of the copy job (SP 8072).
The number of times the application program uses
*CTL
the finisher
*CTL
[0~9999999/ 0 / 1]
*CTL
The number of times the application program starts the sort
mode
The number of times the application program starts the tack
mode
The number of times the application program starts the staple
mode
The number of times the application program starts the
booklet mode
NOTE: The counter of the staple mode (003) can also
increase.
The number of times the application program starts the Z-fold
mode
NOTE: The booklet mode is not included.
The number of times the application program starts the
punch mode
NOTE: The counter of the printer application program (P:)
can also increase.
(Reserved)
*CTL The number of jobs that try to output a specific
number of pages
*CTL
[0~9999999/ 0 / 1]
*CTL
008
009
010
011
012
013
014
5-57
ENGINE SERVICE MODE
21~50 Pages
51~100 Pages
101~300 Pages
301~500 Pages
501~700 Pages
701~1000 Pages
1001~ Pages