Installation; Installation Requirements; Environment; Machine Level - Ricoh J-P3 Service Manual

20 February 2004

1. INSTALLATION

1.1 INSTALLATION REQUIREMENTS

1.1.1 ENVIRONMENT

Ambient Humidity (%RH)
80%
70%
54%
30%
15%
1. Temperature Range:
2. Humidity Range:
3. Ambient Illumination:
4. Ventilation:
5. Avoid exposing the machine to sudden temperature changes, which include:
1) Direct cool air from an air conditioner
2) Direct heat from a heater
6. Avoid installing the machine in areas that might be exposed to corrosive gas.
7. Install the machine at a location lower than 2,500 m (8,200 ft.) above sea level.
8. Install the machine on a strong, level base (☛ 1.1.2).
9. Avoid installing the machine in areas that may be subjected to strong vibration.

1.1.2 MACHINE LEVEL

Front to back: Within 5 mm (0.2")
Right to left: Within 5 mm (0.2")
10°C 15°C
G106I900.WMF
10°C to 32°C (50°F to 89.6°F)
15% to 80% RH
Less than 2,000 lux (do not expose to direct sunlight)
3 times/hr/person or more
1-1
INSTALLATION REQUIREMENTS
Recommended conditions:
25°C 32°C
15 to 25°C
30 to 70%RH