Controls And Indicators; General; Main Power Switch; Power Indicators - Hypertherm HPR130 Manual Gas Instruction Manual

Controls and indicators

General

The main power switch for the HyPerformance plasma system is located on the gas
console. There is no power switch on the power supply. The gas console controls all
system functions. Error codes are shown in the LED display over the current select
knob.

Main power switch

Power indicators

HPR130 Manual Gas Instruction Manual
On Position (I)
AC power is sent to the control transformer, to
turn on the power supply.
Off Position (O)
AC power is cut off to the control transformer,
to turn off the power supply.
AC Green Indicator:
Illuminates when the power switch is in the on
position.
OPERATION
4-3
3